anko WK8359AE 사용자 설명서 - 페이지 2

{카테고리_이름} anko WK8359AE에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. anko WK8359AE 6 페이지. Cordless water kettle

environments;

– bed and breakfast type environments.

· Do not operate the kettle if damaged.

· Avoid spillage on the electrical connector.

· CAUTION! Heating element and surface are subject to

residual heat after use.

·Use the kettle according to these instructions, any misuse

may cause electric shock or other hazards.

·This appliance is not intended to heat liquids other than

water.

· Regarding how to clean the surfaces in contact food,

please refer to section < Cleaning >.

· Before you connect the kettle to the mains supply, make

sure that the voltage indicated on the rating plate, located

on the bottom of the water kettle matches the mains

voltage in your home. If it does not, do not use the kettle.

· The kettle will switch OFF automatically when the water

has boiled. If you want to stop the heating process before

the kettle automatically switches off, press the ON/OFF

switch up.

· After the kettle has switched OFF automatically (or has

been switched OFF manually) it may need time to cool

down and reset. After 15-20 seconds, the kettle can be

switched ON again.

· Always fill the kettle with cold water before switching it

ON.

· The kettle is designed to disconnect the live electrical

supply from the heating element during abnormal

operating conditions. If the water kettle is accidentally

switched ON without water, it will activate the dry boil

protection circuit in the kettle.

· If the kettle ever boils dry, the power indicator will go out.

Allow 15 minutes to cool down before refilling with cold

water. The safety cutout circuit will automatically reset

during this time.

· Place the kettle on a stable flat surface.

· CAUTION! Do not operate the kettle on an inclined plane.

Do not operate the kettle unless the element is fully

immersed. Do not move while the kettle is switched ON.

· Do not use this appliance outdoors.

· Ensure that the kettle is switched OFF before removing it

from the base.

· Do not remove the kettle from its base during operation.

· Never immerse the kettle or cord in water or any other

liquid. Do not allow liquid to penetrate the electrical parts of

this kettle.