anko WK8359AE Podręcznik użytkownika - Strona 2
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Czajnik anko WK8359AE. anko WK8359AE 6 stron. Cordless water kettle
environments;
– bed and breakfast type environments.
· Do not operate the kettle if damaged.
· Avoid spillage on the electrical connector.
· CAUTION! Heating element and surface are subject to
residual heat after use.
·Use the kettle according to these instructions, any misuse
may cause electric shock or other hazards.
·This appliance is not intended to heat liquids other than
water.
· Regarding how to clean the surfaces in contact food,
please refer to section < Cleaning >.
· Before you connect the kettle to the mains supply, make
sure that the voltage indicated on the rating plate, located
on the bottom of the water kettle matches the mains
voltage in your home. If it does not, do not use the kettle.
· The kettle will switch OFF automatically when the water
has boiled. If you want to stop the heating process before
the kettle automatically switches off, press the ON/OFF
switch up.
· After the kettle has switched OFF automatically (or has
been switched OFF manually) it may need time to cool
down and reset. After 15-20 seconds, the kettle can be
switched ON again.
· Always fill the kettle with cold water before switching it
ON.
· The kettle is designed to disconnect the live electrical
supply from the heating element during abnormal
operating conditions. If the water kettle is accidentally
switched ON without water, it will activate the dry boil
protection circuit in the kettle.
· If the kettle ever boils dry, the power indicator will go out.
Allow 15 minutes to cool down before refilling with cold
water. The safety cutout circuit will automatically reset
during this time.
· Place the kettle on a stable flat surface.
· CAUTION! Do not operate the kettle on an inclined plane.
Do not operate the kettle unless the element is fully
immersed. Do not move while the kettle is switched ON.
· Do not use this appliance outdoors.
· Ensure that the kettle is switched OFF before removing it
from the base.
· Do not remove the kettle from its base during operation.
· Never immerse the kettle or cord in water or any other
liquid. Do not allow liquid to penetrate the electrical parts of
this kettle.