anko TA1729-SA 사용자 설명서 - 페이지 4

{카테고리_이름} anko TA1729-SA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. anko TA1729-SA 6 페이지.

anko TA1729-SA 사용자 설명서

FOR THE FIRST USE

Manufacturing residue or oil remained in the toaster heating element may emit an odour
when used for the first time, this is normal and will disappear after few minutes of use.
When using for the first time, we suggest following the below steps under the heading
USING YOUR TOASTER, except without bread. Then let the toaster cool down and
begin toasting the first slice.

USING YOUR TOASTER

1. Put bread slice into the bread slot. Two slices of bread can be inserted at most every time.
Only regular bread slices can be placed into the bread slot.
NOTE: Make sure the crumb tray is completely positioned in place before using.
2. Plug the power cord into the outlet.
3. Set color (browning) control to your desired color. There are 7 levels, the lowest
"1" is for light toasting color and the highest "7" is for dark toasting color. The bread slice
can be toasted to golden color at the middle position.
NOTE: 1). Toasting color for one slice is darker than that for two bread slices at the
same level.
2). If toasting continuously, toasting color for the latter bread will be darker than that for
the previous cycle at the same level.
4. Lower the carriage handle down vertically until it is latched in place. The indicator of
Cancel will be illuminated, and the appliance will begin toasting.
NOTE: The carriage handle can only be latched when the appliance is connected to
mains power.
5. Once the bread has been toasted to the preset color, the carriage handle will
automatically pop up.
NOTE: During toasting, you may also observe the toasting color. If it is satisfactory,
you can press the Cancel button to cancel the operation at any time, but never lift
carriage handle to cancel toasting.
6. If you want to toast frozen bread, set color control knob to your desired color, and then
lower carriage handle down vertically until it is latched in place. Press Defrost button and
the indicator of Defrost button will be illuminated. In this mode, bread will be toasted to
your desired color.
7. If you want to warm cold toasted bread, firstly lower carriage handle vertically until it is
latched in place. Press the Reheat button and the indicator of Reheat button will be
illuminated. In this mode, toasting time is fixed for all level settings. The carriage handle
will automatically spring up and end up the reheating process.
3