anko TA1729-SA Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Toster anko TA1729-SA. anko TA1729-SA 6 stron.

FOR THE FIRST USE

Manufacturing residue or oil remained in the toaster heating element may emit an odour

when used for the first time, this is normal and will disappear after few minutes of use.

When using for the first time, we suggest following the below steps under the heading

USING YOUR TOASTER, except without bread. Then let the toaster cool down and

begin toasting the first slice.

1. Put bread slice into the bread slot. Two slices of bread can be inserted at most every time.

Only regular bread slices can be placed into the bread slot.

NOTE: Make sure the crumb tray is completely positioned in place before using.

2. Plug the power cord into the outlet.

3. Set color (browning) control to your desired color. There are 7 levels, the lowest

"1" is for light toasting color and the highest "7" is for dark toasting color. The bread slice

can be toasted to golden color at the middle position.

NOTE: 1). Toasting color for one slice is darker than that for two bread slices at the

same level.

2). If toasting continuously, toasting color for the latter bread will be darker than that for

the previous cycle at the same level.

4. Lower the carriage handle down vertically until it is latched in place. The indicator of

Cancel will be illuminated, and the appliance will begin toasting.

NOTE: The carriage handle can only be latched when the appliance is connected to

mains power.

5. Once the bread has been toasted to the preset color, the carriage handle will

automatically pop up.

NOTE: During toasting, you may also observe the toasting color. If it is satisfactory,

you can press the Cancel button to cancel the operation at any time, but never lift

carriage handle to cancel toasting.

6. If you want to toast frozen bread, set color control knob to your desired color, and then

lower carriage handle down vertically until it is latched in place. Press Defrost button and

the indicator of Defrost button will be illuminated. In this mode, bread will be toasted to

your desired color.

7. If you want to warm cold toasted bread, firstly lower carriage handle vertically until it is

latched in place. Press the Reheat button and the indicator of Reheat button will be

illuminated. In this mode, toasting time is fixed for all level settings. The carriage handle

will automatically spring up and end up the reheating process.