Absima SR2S 사용 설명서 - 페이지 9

{카테고리_이름} Absima SR2S에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Absima SR2S 10 페이지. 2.4ghz 2 channel radio control system

Fail safe function – digital protection against radio interference. The safety electronic can detect reception of

a "false" or incomplete radio signal. E.g. due to a low transmitter battery or environmental radio interference which

reach the model, or if the model is out of the transmitter range. For protection against damage, servo

switches to the brake position and the model stops.

Setup:

1. Turn on the power of transmitter.

2. Connect power supply to receiver; LED on receiver should be solid.

3. Control the throttle trigger to make servo to "brake" or "stop" mode and remain for a while.

4. Press set up button on receiver. LED on receiver should ﬂash. Should ﬂash for 3 sec.

5. Setup is complete.

Testing:

1. Turn on the power of transmitter.

2. Connect power supply to receiver.

4. Servo which controlled by fail safe should go to brake modus automatically.

5. In case can be complete step by step with the above action, means setting is correct.

2.4GHz 2 Channel remote system

10. Failsafe

Model: SR2S