Druck InstruMetrics ADTS542F 안전 및 설치 매뉴얼 - 페이지 5

{카테고리_이름} Druck InstruMetrics ADTS542F에 대한 안전 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Druck InstruMetrics ADTS542F 16 페이지. Air data test set

2. ADTS Touch

The ADTS Touch is used to control all required functions. The ADTS Touch can be positioned on

the ADTS or used as a hand held mobile unit via a cable or Bluetooth® wireless technology.

The ADTS Touch will have power applied when:

•

Positioned (docked) (1) on a powered-on ADTS.

•

Using an umbilical cable connected to a powered-on ADTS.

•

Powered from its own battery pack.

•

Powered from a universal power supply unit

The ADTS Touch is equipped with an On/Off switch (2) and USB connectors for connection to a

PC or mass storage device (3).

Figure 2: Touch On/Off Switch and USB Connectors

Connector (4) allows connection between the base unit and the ADTS Touch using a 5 metre or

18 metre umbilical cable.

Note: Only use cables that have been supplied by or purchased from Druck.

Figure 1: ADTS Touch Docking Connector

English–ADTS Safety and Installation Guide | 3