Drummond 58009 사용 설명서 및 안전 지침 - 페이지 3

{카테고리_이름} Drummond 58009에 대한 사용 설명서 및 안전 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Drummond 58009 9 페이지. 3/4 hp submersible sewage pump

Installation

The submersible motor pump must be installed in a stationary position with either:

a. A fixed pipeline or

b. A flexible hose pipe.

Please note!

1. Do not install the pump by suspending it

unsupported from its delivery pipe or power cord.

The pump must be suspended from the handle

or be placed on the bottom of the basin.

To ensure that the pump works properly,

keep the bottom of the basin free from

sludge and dirt of all kinds.

1. The pump is equipped with a shock-proof plug

according to regulations. The pump is designed to be

connected to 120 VAC, 60 Hz GFCI protected socket.

2. Make sure that the socket is sufficiently

secured and is in excellent condition.

3. When the plug is inserted into the socket,

the pump will be on standby.

1. This pump is designed to be used for:

Pumping domestic sewage, effluent, wastewater,

groundwater and other nonexplosive,

noncorrosive liquids with up to 2" diameter

solids to gravity-fed sewage line.

Item 58009

For technical questions, please call 1-888-866-5797.

2. If the water level sinks too low, any sludge in the

basin will dry out and stop the pump from starting.

To help ensure the pump will start as required,

check the pump regularly with start-up tests.

WARNING: To prevent death from electric

shock, pump must be connected only to

a GFCI protected outlet.

WARNING! TO PREVENT SERIOUS INJURY:

If the power cord or plug is damaged, do not

use the pump. The power cord or plug may

only be repaired by a certified electrician.

2. This pump should NOT be used for:

Continuous run, fountain/pond water features.

Removing water from swimming pools or spas.

Page 3