DRY AGER DX 1000 사용자 설명서 - 페이지 12

{카테고리_이름} DRY AGER DX 1000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DRY AGER DX 1000 14 페이지.
DRY AGER DX 1000에 대해서도 마찬가지입니다: 사용 설명서 (17 페이지)

24. Screw on the hinge bracket.

25. Insert the adjustable foot

from below and screw on the

bolt.

26. Insert the bolt completely

into the hinge bracket and

tighten the adjustable foot

manually.

27. Place the door on the bolt

and guide it to the hinge

bracket at the top.

Attention

The door must now be held by a

second person.

28. Insert the bearing bolts.

Front view of the upper hinge

29. Insert the bearing bolt until

the groove of the bolt is in

line with the bore of the hinge

bracket.

30. Unscrew the screw from the

bearing pin and screw it into

the hole in the hinge bracket.

31. Place the unit in its final position at the installation location.

Unscrew the adjustable foot at the lower hinge angle until it rests

on the floor, then continue to rotate 90°.

Setting the lateral inclination of the door

If the door is at an angle, adjust the inclination..

32. Disengage the cover on the

inside and slide it outwards.

33. Turn the cover downwards.

Front view of the upper hinge bracket

34. Loosen the screws and move

the hinge bracket to the right

or left.

Tighten the screws.

Refit the cover in reverse

order

Close the door and check that

it is in line with the side walls of

the unit.