Absolare Integrated Amplifier 사용자 설명서 - 페이지 5

{카테고리_이름} Absolare Integrated Amplifier에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Absolare Integrated Amplifier 11 페이지.

3. Unpacking and Placement

After opening the top cover of the box, remove the upper layer of hard foam material.

You can then lift the Amplifier from its box cradling them with the cloth that is

underneath the chassis. Retain the cloth and all packing materials for future use.

The Integrated Amplifier may become very hot during operation. You should always

place it on support feet and leave at least 2 inches (5 cm) clearance above the

Amplifier to allow sufficient ventilation.

The Integrated Amplifier is designed to be supported by separate support feet. It

does not have support feet fixed in place. Feet can affect the sound quality

significantly. Feet must be positioned underneath each unit in direct contact with the

aluminum base plate – not the leather clad MDF covers. There are three areas

where the aluminum base plate is exposed through openings in the leather clad MDF

bottom plate. You can use either three or four feet.

After the Amplifier has been placed in its final position, it can be lifted in turn to locate

the support feet – firstly lifting the back (for 2 feet) and then the front (for 1 or 2 feet)

to be placed underneath the chassis. Adjusting their position will also affect the

sound to varying degrees, depending on the type of rack, location or interaction with

other equipment. For the most situations, the arrangement as shown in the diagram

below is a good starting point.

ABSOLARE Integrated Amplifier User Manual 1.2