Absolare Integrated Amplifier 사용자 설명서 - 페이지 7

{카테고리_이름} Absolare Integrated Amplifier에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Absolare Integrated Amplifier 11 페이지.

5. Connecting the Cables

AC power input is via a standard IEC inlet socket. Operating voltage must only be

changed by an authorized service agent.

The quality of the power cable will affect the sound quality accordingly.

Input is single-ended RCA or transformer balanced XLR depending on the version.

You can connect 4 source devices at the same time. The selector knob on the left-

hand side switches between the input channels.

Speaker binding posts can handle spade lugs, banana plugs or bare wire.

Polyethylene knobs are chosen instead of metal ones to reduce extra conductor

mass and eddy currents. Do not overtight them, the higher friction of the

polyethylene should safely secure the cables in place.

You can connect any speaker with 4Ω impedance or above. The Hybrid Mono

Amplifier can maintain output specifications into impedance variations down to 2.5Ω.

CAUTION: Negative (black) speaker binding posts are not at ground level

electrically. Do not connect them to chassis ground, or to each other in any way.

PLEASE NOTE: This unit is not bridgeable.

ABSOLARE Integrated Amplifier User Manual 1.2