Anolis ArcPower 144 사용자 설명서 - 페이지 8
{카테고리_이름} Anolis ArcPower 144에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Anolis ArcPower 144 20 페이지.
페이지 인쇄Maximum possible number of LED modules connected to the one zone of ArcPower 144:
Model
ArcLine 12 RGB
ArcLine 24 RGB
ArcLine 36 RGB
ArcLine Optic 12 RGB
ArcLine Optic 24 RGB
ArcLine Optic 36 RGB
ArcSource 3 RGB
ArcSource 6 RGB
ArcSource 12 RGB
ArcSource 7 RGBW
Note: You cannot combine RGB and RGBW modules (e.g. ArcSource 6 RGB and ArcSource 7 RGBW)
each other because white LEDs will not light.
5.2 Master-slave operating
1. Unplug from the mains before installation.
2. Connect the LED module to the fixtures.
3. Connect the DMX output of the master fixture in the data-chain with the DMX input of the first slave. Always
connect output with the input of the next slave until all slaves are connected. Up to 32 fixtures can be con-
nected in master/slave chain
4. Insert the termination plug (with 120 Ohm) into DMX input of the master fixture and into the DMX output of the
last slave fixture in the link in order to ensure proper transmission on the data link.
5. Connect the fixtures to the mains.
6. See chapter „Stand-alone mode" in order to set the fixture as a master or slave.
C.bA.
total
Red
Green
LEDs
LEDs
LEDs
12
4
4
24
8
8
36
12
12
12
4
4
24
8
8
36
12
12
3
1
1
6
2
2
12
4
4
7
2
2
Blue
White
Max. number of
LEDs
LEDs
connected modules
4
-
8
-
12
-
4
-
8
-
12
-
1
-
2
-
4
-
2
1
8
3
1
1
3
1
1
12
6
3
6