DryGuy TurboDry DG00301 사용 설명서 - 페이지 3

{카테고리_이름} DryGuy TurboDry DG00301에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DryGuy TurboDry DG00301 4 페이지. Shoe & boot dryer and warmer

OPERATING INSTRUCTIONS:

1. Plug the TurboDry

12-Volt automotive receptacle using the proper power cord included.

2. With care slide into footwear being attentive not to restrict or block air flow into fan or restrict or block

circulation.

3. Do not trap, smother, pinch, or suffocate the air circulation into or out of footwear with clothing or any

other substance. This may cause overheating.

4. Do not force the TurboDry

5. Leave as much opening at entrance to footwear as attainable being careful not to restrict or block air

flow by any means.

6. NOT FOR USE IN GLOVES, SOCKS, OR GARMENTS OTHER THAN SHOES AND BOOTS.

heLPfuL TIPs:

1. Make sure not to pinch or otherwise suffocate air circulation when placing unit into footwear. Loosen

laces and pull footwear tongue outward to help open breathing space whenever possible.

2. Footwear should be dried after every use to help prevent bacteria and fungus growth the primary

cause of footwear odor.

3. Smaller footwear and garments will dry quicker than larger items.

4. Your energy efficient TurboDry

quietly and quickly dries wet garments, but it does not generate a forceful air stream that might

possibly damage. At first you may suspect the unit is not operating properly. We recommend you place

the back of your hand near the drying holes so you are able to better feel the gently warmed air stream.

Heat will only be felt when unit is placed in footwear and in service.

OPeRATION TIMe:

• Drying time varies depending upon extent of moisture as well as temperature and humidity.

• We recommend a minimum of one hour every time your boots are used.

MAINTeNANce:

Use only mild soap and a damp cloth to clean the TurboDry

immerse any part into liquid.

into any standard 120 Volt 60 Hz electrical household outlets OR any standard

™

into smaller footwear.

™

heats to a gentle temperature and using "Forced Air" technology

™

dryguy.com

. Never let any liquid get inside the unit; never

™