DryGuy TurboDry DG00301 Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Suszarka DryGuy TurboDry DG00301. DryGuy TurboDry DG00301 4 stron. Shoe & boot dryer and warmer
Drukuj stronęOPERATING INSTRUCTIONS:
1. Plug the TurboDry
12-Volt automotive receptacle using the proper power cord included.
2. With care slide into footwear being attentive not to restrict or block air flow into fan or restrict or block
circulation.
3. Do not trap, smother, pinch, or suffocate the air circulation into or out of footwear with clothing or any
other substance. This may cause overheating.
4. Do not force the TurboDry
5. Leave as much opening at entrance to footwear as attainable being careful not to restrict or block air
flow by any means.
6. NOT FOR USE IN GLOVES, SOCKS, OR GARMENTS OTHER THAN SHOES AND BOOTS.
heLPfuL TIPs:
1. Make sure not to pinch or otherwise suffocate air circulation when placing unit into footwear. Loosen
laces and pull footwear tongue outward to help open breathing space whenever possible.
2. Footwear should be dried after every use to help prevent bacteria and fungus growth the primary
cause of footwear odor.
3. Smaller footwear and garments will dry quicker than larger items.
4. Your energy efficient TurboDry
quietly and quickly dries wet garments, but it does not generate a forceful air stream that might
possibly damage. At first you may suspect the unit is not operating properly. We recommend you place
the back of your hand near the drying holes so you are able to better feel the gently warmed air stream.
Heat will only be felt when unit is placed in footwear and in service.
OPeRATION TIMe:
• Drying time varies depending upon extent of moisture as well as temperature and humidity.
• We recommend a minimum of one hour every time your boots are used.
MAINTeNANce:
Use only mild soap and a damp cloth to clean the TurboDry
immerse any part into liquid.
into any standard 120 Volt 60 Hz electrical household outlets OR any standard
™
into smaller footwear.
™
heats to a gentle temperature and using "Forced Air" technology
™
dryguy.com
. Never let any liquid get inside the unit; never
™