Anova TP2502 사용자 설명서 - 페이지 7

{카테고리_이름} Anova TP2502에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Anova TP2502 12 페이지. Battery pruning shears

working time and efficiency of the batteries.

5. Do not use damaged batteries or disassemble the charger or batteries.

6. Batteries can explode in fire. Never burn batteries.

7. Do not charge batteries outdoors or in humid environments.

8. With the gradual decrease of the electric quantity of the battery, it is normal to reduce the capacity of

the cutting diameter.

9. During the charging process, do not use electric pruning shears.

3.5 Blade sharpening

1. Turn off the scissors with the blade open and remove the battery.2. Both sides of the movable blade

are sharpened using sharpening stone by forming the section angle with the blade;3. After sharpening

the blade, clean it, connect and turn on the scissor, test that it moves correctly and close the blade for

future work.

3.6 Blade replacement

1. To ensure your safety, please remove the battery before handling the blade.2. Step by step, as shown

below, replace the blade.3. After replacement, clean the blade, turn on the scissor and test to see if

everything is correct.

1. Remove the screws with a screwdriver and open the cover.2. Remove the blade nut retainer bolts

(this step is important) 3.Remove the blade nut

4. Remove the pin and remove the moving knife5. Remove bedknife.6. When replacing the blades,

lubricating oil should be added between the blades