FOVNO ES-H1B 사용 설명서 - 페이지 10

{카테고리_이름} FOVNO ES-H1B에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. FOVNO ES-H1B 16 페이지. Electric inverted sucker bike rack

Instructions

Installation method 2

1. Place the alarm in the vehicle Connect the alarm to a suitable USB power supply,If working normally a red LED light will be shown.

2. Select the installation position of each suction foot on the roof or back of the vehicle according to Figure Ⅲ

3. Put the control box suction foot in the selected position, turn on the power switch,and press the control box down,so that the suction foot is fully adsorbed on the installation

surface.

4. Open the handlebar clamps of handlebar suction foots according to Figure Ⅳ, and place them in the selected position.The distance between the two is determined according to

the length of the two sides of the bicycle handlebar. Connect the pneumatic hose as shown in Figure Ⅳ, and press the handlebar suction foots respectively,then the two handlebar

suction foots will be automatically attached to the installation surface.

Figure Ⅲ

Figure Ⅳ