DSC PC1575RK 사용 설명서 - 페이지 12

{카테고리_이름} DSC PC1575RK에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DSC PC1575RK 20 페이지. Tyco digital security control instruction manual

4. Activate each sensor in turn (e.g. open a door/window or walk in motion detector areas).

From an LED keypad, observe the zone light turn ON when the zone is activated. The zone light will

turn OFF when the system restores to normal (i.e. door or window closed).

From an LCD keypad, the following message will be displayed when each zone is activated...

Secure System

Before Arming <>

6. If the panel has any fire zones, activation will cause the alarm signal to sound in a pulsed mode.

7. Disable the walk test.

From an LED keypad, enter [ ][6][Master Code][0]. The keypad will sound one long beep when the

walk test is disabled.

From an LCD keypad, press [ ] to enter the functions list. Use the arrow (< >) keys to scroll to find

"User Functions" and press [ ] to select. Enter your Master Code and scroll to find the following

message.

Select Option <>

Walk Test

is disabled

8. When testing is complete, call and advise the monitoring station.

Door Chime Feature

The door chime feature is used, while the panel is disarmed, to provide a tone from the keypad each

time a door or window is opened or closed. The doors and windows which will provide this indication

are programmed by your installer.

To activate the door chime from an LED Keypad:

Enter [ ][4] to turn the door chime feature ON and OFF. When the command is entered, the keypad

buzzer will beep 3 times if the door chime feature is enabled and will sound one long beep if it is

disabled. Press [#] to return to the Ready state.

To activate the door chime from an LCD Keypad:

Start with the panel in the disarmed mode, press [ ] to enter the function list, then scroll to find...

Press [ ] or [4] to enable or disable the Door Chime feature. Press [#] to return to

Press (*) For<>

the Ready state.

Door Chime

Use the arrow (< >) keys to view which zone is open. This message will

disappear when the zone is restored.

Press [ ] to select. The keypad sound one long beep and the display will read...