DAITEM 145-21X 설치 매뉴얼 - 페이지 2

{카테고리_이름} DAITEM 145-21X에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DAITEM 145-21X 19 페이지. Outdoor motion detector 2 x 12 m

페이지 인쇄
Summary
1. Introduction .................................... ........... 67
2. Preparation ..................................... ........... 69
2.1 Opening the detector........................... . 69
2.2 Power supply ................................... ..... 69
3. Programming..................................... ........ 70
4. Configuration.................................... ......... 71
5. Installation precautions........................ .... 72
6. Installation.................................... .............. 73
6.1 Testing the radio link ......................... .... 73
6.2 Fixing ......................................... ............ 73
of detection....................................... ......... 74
7.1 Range of detection ............................. .. 74
of the detection angle ........................... 76
options ............................................ ...... 77
8. Operating test.................................. .......... 78
8.1 Detection zone test............................ ... 78
8.2 Real test ...................................... .......... 78
9. Maintenance ..................................... ......... 78
9.1 Fault indication............................... ....... 78
9.2 Changing the battery ........................... . 78
10. Technical data ................................. ........ 79
Recommendations
The user must not attempt to access the siren's int ernal parts, except areas described in this
manual. If the user does access these parts, the pr oduct guarantee will be considered null
and void and DAITEM shall not be held responsible f or any problems. Touching the siren's
internal parts and/or electronic components can dam age the product. Furthermore, the siren
is designed in such a way that these parts and comp onents do not need to be accessed for
operation or maintenance purposes.

1. Introduction

IMPORTANT
• Some functions are only available with control pa
(enter
• Operating differences with respect to former rang
available in the Daitem Installers section at www.d
The 2 x 12 m external motion detector has been spec ially designed to detect intruders before
they have a chance to break in by monitoring the ar ea outside the protected site.
Because both detection systems operate on either si de of the detector and detection can be
adjusted to provide narrow 4 to 24 m protection (2
product for protecting a façade.
Its immunity to false alarms caused by sunlight or
reliable pet-tolerant detection system (both detect ion beams have to be broken in order to
trigger a prealarm or alarm). Its performance is fu rther enhanced by a temperature
compensation system that automatically adjusts and
outside temperature comes close to that of a human
67
nel version 2.0.0 or later
) on the control panel keypad to check the v
es are described in the compatibility booklet
aitem.co.uk .
x 12 m on each side), this is the ideal
car headlights is backed up by its highly
increases detection sensitivity when the
being (35°C - 37°C).
GB
ersion).