ansio 1308 지침 및 운영 매뉴얼 - 페이지 7
{카테고리_이름} ansio 1308에 대한 지침 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ansio 1308 10 페이지. Portable ptc ceramic heater
페이지 인쇄
TROUBLESHOOTING
Problem
When the power
is turned ON,
the power
indicator light
does not
illuminate, and
the heater does
not work.
The heater
suddenly stops
during working.
The heater
shuts off
repeatedly or
gets over
heated or any
other
malfunctioning
of the heater.
Customer Support - UK Toll Free 0800 080 6781 or +44 207 157 9795
ANSIO 1308 (M21v01)
Possible Cause
The plug may not be
inserted well.
The temperature
control knob is not
turned ON clockwise
to set the desired
temperature.
The temperature
exceeds the
threshold of the
thermal cut-off,
hence the heater
is turned OFF
automatically.
Dust
accumulation
inside the heater.
Solution
Check whether the plug
is properly inserted into
the receptacle.
Alternatively, ensure
that the power
receptacle is fully
functional or try another
plug point.
Check whether the
temperature control
knob is turned clockwise
to set the desired
temperature.
Cool the heater down
completely before reuse.
Clean the heater. Refer
to "Cleaning and
Maintenance" section.
7