Anslut 004586 사용 설명서 - 페이지 11
{카테고리_이름} Anslut 004586에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Anslut 004586 12 페이지. Solar cell lighting
페이지 인쇄Mounting on fence
1.
Mark out on the fence where the fastener
is to be mounted.
2.
Drill hole.
3.
Mount the fastener on the fence with a
screw.
4.
Put the lamp on the fastener.
5.
Fasten the lamp to the fastener with a screw.
FIG. 4
USE
•
Before the lamp can shine at full capacity
the solar panel must have charged the
battery in direct sunlight for 8–12 hours
with the switch in the ON position.
•
The switch must be in the ON position for
the lamp to shine.
MAINTENANCE
•
Clean the solar panel regularly with a
damp cloth. This ensures optimum
capacity and battery charging.
•
Never allow abrasive substances or
materials to come into contact with the
solar panel.
Replacing the battery
1.
Put the switch in the OFF position.
2.
Use a screwdriver to undo the three screws
holding the battery cover.
3.
Replace the battery with a new one.
4.
Replace the battery cover and screw tight.
5.
Put the switch in the ON position.
6.
Charge the battery in direct sunlight for
maximum lighting up time.
FIG. 5
EN
11