Anslut 004586 Operating Instructions Manual - Page 11

Browse online or download pdf Operating Instructions Manual for Lighting Equipment Anslut 004586. Anslut 004586 12 pages. Solar cell lighting

Print Page
Mounting on fence
1.
Mark out on the fence where the fastener
is to be mounted.
2.
Drill hole.
3.
Mount the fastener on the fence with a
screw.
4.
Put the lamp on the fastener.
5.
Fasten the lamp to the fastener with a screw.
FIG. 4
USE
•
Before the lamp can shine at full capacity
the solar panel must have charged the
battery in direct sunlight for 8–12 hours
with the switch in the ON position.
•
The switch must be in the ON position for
the lamp to shine.

MAINTENANCE

•
Clean the solar panel regularly with a
damp cloth. This ensures optimum
capacity and battery charging.
•
Never allow abrasive substances or
materials to come into contact with the
solar panel.

Replacing the battery

1.
Put the switch in the OFF position.
2.
Use a screwdriver to undo the three screws
holding the battery cover.
3.
Replace the battery with a new one.
4.
Replace the battery cover and screw tight.
5.
Put the switch in the ON position.
6.
Charge the battery in direct sunlight for
maximum lighting up time.
FIG. 5
EN
11