Foxfury Lighting Solutions 480-331 제품 설명서 - 페이지 8

{카테고리_이름} Foxfury Lighting Solutions 480-331에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Foxfury Lighting Solutions 480-331 12 페이지. Shield light
Foxfury Lighting Solutions 480-331에 대해서도 마찬가지입니다: 제품 설명서 (12 페이지)

페이지 인쇄

FEATURES (CONT'D)

DUAL SETTINGS

The Taker B30 includes two mode settings: the ON/OFF SETTING and the

TACTICAL SETTING. The ON/OFF SETTING simply allows the Light Head

to turn ON and OFF . The TACTICAL SETTING allows you to choose from

three (3) different Operational Modes: Momentary , Continuous On, and Turbo-

Strobe™. The Taker B30 comes in the TACTICAL SETTING.

To change from the TACTICAL SETTING to the ON/OFF SETTING:

With the light turned OFF , press the Power/Mode Switch twice in rapid

succession and hold for 10 seconds. The light should begin to flash. Once

it begins flashing, it is now in the ON/OFF SETTING.

To change from the ON/OFF SETTING to the TACTICAL SETTING:

With the light turned OFF , press and hold the Power/Mode Switch for 10

seconds. The light should begin to go through a slow Turbo-Strobe™ cycle

and then turn OFF . It is now in the TACTICAL SETTING.

REPLACEABLE LENS

The LEDs of the B30 are protected by a lens that can easily be replaced if it

were to be damaged.

HEAVY DUTY BRAIDED CABLE

The cable of the B30 is made of steel that protects the internal wiring. The

installed Black Cable Sleeve (P/N 51-035) helps to protect the steel cable while

providing a black covering.

RETROFIT

The B30 can retrofit to most ballistic shields without drilling or permanent

modification.