Anslut 421-341 설치 지침 매뉴얼 - 페이지 9
{카테고리_이름} Anslut 421-341에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anslut 421-341 9 페이지. Led flourescent tube
페이지 인쇄
Final installation: The existing fitting has electromagnetic ballast
1.
Switch off the mains voltage (230 V).
2.
Remove the starter and insert the bypass in the starter holder.
3.
Insert the LED fluorescent tube in the fitting.
4.
Switch on the mains voltage (230 V).
NOTE: The bypass is included in the final installation kit.
Before final installation – existing fitting
NOTE: The LED flourescent tube will only work after modification of the original fitting. The EMC
characteristics must therefore be rechecked, together with the LED fluorescent tube, after modification of
the fitting. The kit consists of 1 LED fluorescent tube, installation instructions, and bypass for installation
in starter holder (1).
Jula reserves the right to make changes. In the event of problems, please contact our service
department.
www.jula.com
ENGLISH
After final installation – LED fluorescent fitting
1 = Bypass
9