Anslut 421-341 Installation Instructions Manual - Page 9
Browse online or download pdf Installation Instructions Manual for Work Light Anslut 421-341. Anslut 421-341 9 pages. Led flourescent tube
Print Page
Final installation: The existing fitting has electromagnetic ballast
1.
Switch off the mains voltage (230 V).
2.
Remove the starter and insert the bypass in the starter holder.
3.
Insert the LED fluorescent tube in the fitting.
4.
Switch on the mains voltage (230 V).
NOTE: The bypass is included in the final installation kit.
Before final installation – existing fitting
NOTE: The LED flourescent tube will only work after modification of the original fitting. The EMC
characteristics must therefore be rechecked, together with the LED fluorescent tube, after modification of
the fitting. The kit consists of 1 LED fluorescent tube, installation instructions, and bypass for installation
in starter holder (1).
Jula reserves the right to make changes. In the event of problems, please contact our service
department.
www.jula.com
ENGLISH
After final installation – LED fluorescent fitting
1 = Bypass
9