3M Littmann Lightweight II S.E. 빠른 시작 매뉴얼 - 페이지 5
{카테고리_이름} 3M Littmann Lightweight II S.E.에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3M Littmann Lightweight II S.E. 6 페이지. Stethoscope
페이지 인쇄both thumbs, moving in opposite directions
around the chestpiece. Visually inspect the
edge where the diaphragm engages the rim for
uniform containment. Minor adjustments may
be made by slightly pulling and rolling the rim
away from the diaphragm, allowing the
diaphragm to slip into position.
examine the ring to
ensure that the flexible
edge is smoothly engaged
inside the rim. Refer to
illustration for correct
assembly of the non-chill
rim and diaphragm. If
necessary, flex the
assembly by pinching the
outer rim edge between
the thumb and fingers.
To attach the
rim/diaphragm assembly
to the chestpiece, engage
the groove of the rim
(with the diaphragm
attached) around the
chestpiece at one point
and hold it in place with
your thumbs. Slowly roll
the rim around and over
the chestpiece edge using
Littmann Stethoscope Service and
Warranty Program:
Your Littmann stethoscope comes with the
finest service and warranty policy in the
industry. The Littmann Lightweight
Stethoscope is warranted against any defects in
material and workmanship for a period of two
(2) years. If a material or manufacturing defect
is discovered during the warranty period,
repairs will be made without charge upon the
return of the instrument to 3M, except in cases
of obvious abuse or accidental damage.
For maintenance or repair services, write a
short note explaining the repair or service you
require, include your name, address and phone
number and send your stethoscope directly to:
3M Health Care Service Center
Bldg. 502, Suite 200
3350 Granada Ave. North
Oakdale, MN 55128
1-800-292-6298
IN CANADA:
3M Health Care Service Center
3M Canada Inc.
80 Enterprise Drive South
London, Ontario
Canada N6N1C2
1-800-563-2921
Outside of the U.S. and Canada please contact
your local 3M subsidiary for maintenance and
repair information.
4