3M Littmann Lightweight II S.E. Посібник із швидкого старту - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Медичне обладнання 3M Littmann Lightweight II S.E.. 3M Littmann Lightweight II S.E. 6 сторінок. Stethoscope

Друкувати сторінку

both thumbs, moving in opposite directions

around the chestpiece. Visually inspect the

edge where the diaphragm engages the rim for

uniform containment. Minor adjustments may

be made by slightly pulling and rolling the rim

away from the diaphragm, allowing the

diaphragm to slip into position.

examine the ring to

ensure that the flexible

edge is smoothly engaged

inside the rim. Refer to

illustration for correct

assembly of the non-chill

rim and diaphragm. If

necessary, flex the

assembly by pinching the

outer rim edge between

the thumb and fingers.

To attach the

rim/diaphragm assembly

to the chestpiece, engage

the groove of the rim

(with the diaphragm

attached) around the

chestpiece at one point

and hold it in place with

your thumbs. Slowly roll

the rim around and over

the chestpiece edge using

Littmann Stethoscope Service and

Warranty Program:

Your Littmann stethoscope comes with the

finest service and warranty policy in the

industry. The Littmann Lightweight

Stethoscope is warranted against any defects in

material and workmanship for a period of two

(2) years. If a material or manufacturing defect

is discovered during the warranty period,

repairs will be made without charge upon the

return of the instrument to 3M, except in cases

of obvious abuse or accidental damage.

For maintenance or repair services, write a

short note explaining the repair or service you

require, include your name, address and phone

number and send your stethoscope directly to:

3M Health Care Service Center

Bldg. 502, Suite 200

3350 Granada Ave. North

Oakdale, MN 55128

1-800-292-6298

IN CANADA:

3M Health Care Service Center

3M Canada Inc.

80 Enterprise Drive South

London, Ontario

Canada N6N1C2

1-800-563-2921

Outside of the U.S. and Canada please contact

your local 3M subsidiary for maintenance and

repair information.