Daitsu CDV-L1 설치 및 사용자 설명서 - 페이지 17
{카테고리_이름} Daitsu CDV-L1에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Daitsu CDV-L1 20 페이지.
페이지 인쇄
User's Manual of Remote Controller
In unit on status, receiver light board or wired controller is defaulted to display set
temperature. Press TEMP button to view indoor or outdoor ambient temperature.
When
is displayed, it means the displayed temperature is indoor ambient
temperature.
When
is displayed, it means the displayed temperature is outdoor ambient
temperature.
Ambient temperature displaying will be exited after 5s and then set temperature
will be displayed.
2.3 Introduction of special functions
Setting child lock
(1).
Press ▲ and ▼ button simultaneously to lock the buttons on remote controller
1).
and
is displayed.
Press ▲ and ▼ button simultaneously again to unlock the buttons on remote
2).
controller and
If the buttons are locked,
3).
operation on the button is invalid.
Setting low-temperature dehumidifying
(2).
Under dry mode and when set temperature is16℃, press ▼ button twice to enter
low-temperature dehumidifying function and set temperature is displayed as 12℃. If
low-temperature dehumidifying function has been set, press ▲ button to exit
low-temperature dehumidifying function and set temperature is displayed as 16℃.
Note: If energy-saving function is turned on, low-temperature dehumidifying function is
invalid.
(3).
Absence function
Press CLOCK and TEMP button simultaneously to enter absence function.
1).
Temperature displaying zone displays 8.
Press CLOCK and TEMP button simultaneously again to exit absence
2).
function. Temperature displaying zone resumes previous display.
In winter, absence function can keep the indoor ambient temperature above
3).
0℃ to avoid freezing.
Note: Absence function is only available in heating mode and it will be exited when
switching mode.
(4).
Setting of master mode indoor unit
In fan mode, set master mode indoor unit through ▲ and ▼ button:
is not displayed.
blinks 3 times when pressing the button and any
14