DSC HS2128 E 사용자 설명서 - 페이지 6
{카테고리_이름} DSC HS2128 E에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DSC HS2128 E 7 페이지. Alarm panel
페이지 인쇄
Chapter 2.0 Understanding Your Keypad
12.
OPEN
13.
AC
14.
System Trouble
15.
Night
16.
Ready Light (green)
17.
Armed Light (red)
Note: For UL listed installations, zones can only be bypassed manually.
2.2 Keypad Models
Note: In the following list if x = 9 (the system operates in 912-919MHz), x=4 (the system operates
in 433MHz band) or x=8 (the system operates in 868MHz band). Only models operating in 912-
919MHz band are UL/ULC listed.
HS2LCD
Alphanumeric LCD keypad
HS2LCDP
Alphanumeric LCD keypad with Prox. Tag support
HS2ICN
Icon keypad
HS2ICNP
Icon keypad with Prox. Tag support
HS2LED
LED keypad
HS2LCDRFx
Alphanumeric LCD keypad with wireless receiver
HS2LCDRFPx
Alphanumeric LCD keypad with wireless receiver and Prox. tag support
HS2ICNRFx
Icon keypad with wireless receiver
HS2ICNRFPx
Icon keypad with wireless receiver and Prox. tag support
HS2LCDWFx
Wireless Alphanumeric LCD keypad
HS2LCDWFPx
Wireless Alphanumeric LCD keypad with Prox. Tag support
HS2LCDWFPVx Wireless Alphanumeric LCD keypad with Prox. Tag support & Voice Promp
HS2TCHP
Touchscreen keypad. For additional information, refer to the HS2TCHP
Touchscreen User Manual.
This icon is used with clock digits 1 and 2 to indicate activated
zones (not alarm) on the system. When zones are opened, the
OPEN icon will turn on, clock digits 1 and 2 will scroll through
the violated zones.
Indicates that AC is present at the main panel.
Indicates that a system trouble is active.
Indicates that the panel is armedin the Night Mode.
If the Ready light is on, the system is ready for arming. If the
toggle of the Ready LED flashes for Force Arming enabled, the
LED flashes with force armable zones open on the partition.
If the Armed light is on, the system has been armed successfully.
- 6 -