DSC HS2128 E 사용자 설명서 - 페이지 5

{카테고리_이름} DSC HS2128 E에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DSC HS2128 E 7 페이지. Alarm panel

페이지 인쇄

Chapter 2.0 Understanding Your Keypad

2.0 Understanding Your Keypad

The PowerSeries Neo Alarm System supports a variety of wireless, hardwired and proximity

sensor LCD, LED and Icon keypads. All keypads come equipped with the LED status lights

described in section 1 "Quick Reference". HS2LCD series keypads display system messages on

their LCD screen. HS2ICN series keypads display messages, as described in the following section.

HS2LED series keypads display messages via a series of numbered LEDs, as described in the fol-

lowing section. All keypad versions will have a solid blue LED bar that is always on except when,

if enrolled, a proximity tag is presented and successfully read by the keypad.

2.1 Icon and LED Keypad Symbols

HS2ICN Series

Clock Digits 1, 2

: (Colon)

Clock Digits 3, 4

1 to 8

Memory

Bypass

Program

Away

Fire

10.

Stay

11.

Chime

These clock digits indicate the hour when the local clock is active.

Digit 2 is also used to identify the zone number.

This icon is the hours/minutes divider and will flash once per

second when the local clock is active.

These are the minute digits when the local clock is active. The

digits 3 and 4 are used to indicate the zone number for open zones

or alarm in memory. These two digits combined with the clock

digit 2, scroll one zone per second from the lowest number to the

highest, when scrolling through zones.

These numbers identify troubles when [*][2] is pressed.

Indicates that there are alarms in memory.

Indicates that there are zones bypassed.

Indicates that the system is in Installer or User's programming, or

that the keypad is busy, and the LED will flash. If an Access

Code is required, while accessing [*] menus, this LED is ON and

solid to indicate that the code is required.

Indicates that the panel is armed in the Away Mode.

Indicates that there are fire and/or CO alarms in memory.

Indicates that the panel is armed in the Stay Mode.

This icon turns on when the Chime function key is pressed to

enable Door Chime on the system. It will turn off when the chime

function key is pressed again to disable Door Chime.

- 5 -

HS2LED Series