DSC HS2128 E 사용자 설명서 - 페이지 3

{카테고리_이름} DSC HS2128 E에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DSC HS2128 E 7 페이지. Alarm panel

페이지 인쇄
DSC HS2128 E 사용자 설명서
Chapter 1.0 Quick Reference

1.0 Quick Reference

The PowerSeries Neo Alarm System uses shortcut keys to access features on all models of
keypads. When using an LCD keypad, the PowerSeries Neo Alarm System uses a menu based nav-
igation system. The scroll keys can be used to navigate through the list of options contained within
the current menu. For more information see: 2.0 "Understanding your Keypad". Look up detailed
information on any of the listed actions using the accompanying Section number.
For detailed information about the PowerSeries Neo Alarm System, refer to the full online manual,
which can be accessed from the DSC.com website.
Note: Some features must be enabled by installer.
Note: Bypass Groups are not permitted in UL listed installations.
Status Lights
Ready - Indicates system normal. Must be on to arm system. All zones must be
secured or bypassed and the system disarmed for this light to activate.
Armed - Indicates system is armed . If the Ready light and the Armed light are both
on, an Exit Delay is in progress.
Trouble - On indicates a system malfunction or tamper. Flashing indicates that the
keypad has a low battery condition. Follow the instructions displayed or enter [*][2] to
view trouble. Correcting the trouble turns off the indicator.
AC Power - Indicates AC Power is present. The AC Power light will turn off when
AC is absent.
Action
Press
Away Arm
Stay Arm
Night Arm
When armed in stay mode [*][1] + [Access Code*]
Disarm
[Access Code]
No-Entry Arming
[*][9] + [Access Code*]
Quick Arm /Quick Exit [*][0]
Abort Arming
[Access Code]
Sequence
Bypassing - All bypass commands begin with [*][1] + [Access Code*]
Bypass Individual
[3 Digit Zone #]
Zones
Bypass All Open Zones [9][9][8]
Recall Last Bypass
[9][9][9]
Clear Bypass
[0][0][0] OR [Scroll] Bypass Options + [*] + [Scroll] Clear Bypasses + [*]
Program Bypass
[3 digit zone #s] + [9][9][5] OR [3 digit zone #s] + [Scroll] Bypass Options +
Group
[*] + [Scroll] Prg Bypass Group + [*]
Load Bypass Group
[9][9][1] OR [Scroll] Bypass Options + [*] + [Scroll] Bypass Group + [*]
Common Functions
Set Time and Date
[*][6] [Master Code] + [0][1]
for 2 seconds + [Access Code*]
for 2 seconds + [Access Code*]
- 3 -
Function
Emergency
Keys
Keys
Fire
Stay Arm
Medical
Away Arm
Panic
Chime
Reset
Sensors
Quick Exit
Section
3.1.2
3.2
3.3
3.1
3.4
3.5
3.7.1
3.7.1
3.7.1
3.7.1
3.8
3.8
8.2