DSC WS4936 설치 및 운영 지침 매뉴얼 - 페이지 4

{카테고리_이름} DSC WS4936에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DSC WS4936 6 페이지. (433mhz) / (868mhz) series wireless smoke detector

페이지 인쇄

attention should be given to the escape routes from sleep-

ing quarters.

It is essential that escape from a bedroom be possible

without opening the interior door. Consider the following

when making your escape plans:

Ensure that doors and windows that open to the outside

are easily opened. Ensure that they are not painted shut

and that the locking mechanisms operate smoothly.

If opening or using the exit is too difficult for children, the

elderly or handicapped, plans for their rescue should be

developed. This plan includes making sure that those

who are to perform the rescue can promptly hear the fire

warning signal.

If the exit is above the ground level, an approved fire lad-

der or rope should be provided, as well as training in its

use.

Exits on the ground level should be kept clear. Be sure to

remove snow from exterior patio doors in the winter and

that outdoor furniture or equipment does not block exits.

The family should have a predetermined assembly point

where everyone can be accounted for; for example,

across the street or at a neighbor's house.

Once everyone is out of the house, call the Fire Depart-

ment.

A good plan emphasizes a quick escape. Do not invest-

igate first or attempt to fight the fire, and do not attempt to

rescue belongings or valuables as this takes up time.

Once outside, do not re-enter the house; wait for the Fire

Department.

Write the plan down and rehearse it frequently so that

should an emergency ever arise, everyone will know

what to do. Revise the plan as conditions change; for

example, when there are more or fewer family members

in the home or if there are changes to the house.

Make sure your fire warning system is operational by con-

ducting weekly tests. If you are unsure about system oper-

ation, contact your smoke detector installer or dealer.

DSC recommends that you contact your local Fire Depart-

ment and request further information on home fire safety

and escape planning. If available, have your local fire pre-

vention officer conduct an in-house fire safety inspection.

Testing Your Smoke Detector

Follow the test procedure described here or contact your

smoke detector dealer or installer for testing instructions.

DSC recommends that you test the entire alarm system

at least once a week to verify the operation of all system

functions.

Smoke Detector Unit Test

Initiate test by pressing the test button for 5 seconds (min.),

the sounder makes clicking noises during this time. Press the

button until the unit alarm sounds, an alarm should be sent to

the control panel. When the button is released, the alarm

should cease. If this does not occur, ensure batteries are the

correct type, in good condition and are installed correctly (see

3. Install Batteries in the Installation Instructions section).

Upon completing the functional testing of the smoke detector,

check the unit's sensing chamber to ensure proper operation.

To test the sensing chamber, wave a lit cotton wick or punk

stick around the outside of the unit until a generous amount of

smoke enters the sensing chamber or the unit alarms. If the

smoke detector does not function properly, call your smoke

detector installer or dealer for service.

Owner's Maintenance

The smoke detector is designed to require minimum main-

tenance. If the case becomes dusty, vacuum with a small

brush attachment. If the case is greasy, wipe the case gently

with a soft cloth slightly dampened with soapy water.

Never disassemble the smoke detector; there are no user

serviceable parts inside the unit. You may only remove

detector from backplate to replace batteries if not ser-

viced by installer. When replacing the batteries, follow the

instructions specified within the Installation Instructions,

Item 3 Install Batteries.

Never paint the unit. Paint may prevent smoke from enter-

ing the unit. If you are planning renovations or repainting,

contact your installer and ask that the unit be temporarily

removed until work is complete.

If the unit is located in an area where it is exposed to high

levels of dust or insects and causes false alarms, it may

require service; contact your smoke detector installer or

dealer.

Testing and maintenance procedures shall be in accordance

with CAN/ULC-S552-02.

Specifications

Regulatory Listing: UL268/ULC-S531

Diameter: 5 in (125 mm)

Height: 2.5 in (63 mm)

Weight (including battery): 8.75 oz (243 g)

Color: White

Spacing rating: 70 ft (21.3 m)

Sensitivity: 1.26 - 2.39%/foot obscuration

Alarm Sensitivity (threshold) EU: complies with

EN14604

Alarm Sensitivity (threshold) UL: 3.0±0.8%/ft obscur-

ation, ULC: 2.0±0.5 %/ft obscuration

Audible Signal (ANSI Temporal 3): 85dBA min. in alarm

Sounder Alarm Pattern UL, ULC, EU: evacuation tem-

poral pattern

Operating Temperature: 40° to 100°F (4.4° to 37.8°C)

Operating Temperature with Heat Detector: 32º-100ºF

(0º-37.8ºC)

Operating Temperature for Smoke Alarm (Australian ver-

sion): 41º-113ºF (5º-45ºC)

Heat Alarm: 135ºF (57ºC)

Humidity: 15%-90% RH, non-condensing

Approved Batteries: 3 AAA Energizer E92 or Duracell

Procell PC2400

Alarm Silencing (ULC Model) 8 minutes automatically

resettable

Supervisory Transmission Frequency UL, ULC: 64 min.

intervals

Supervisory Transmission Frequency EU: 12 minute inter-

vals

Low Battery Detection: Low battery 14 days remaining

Limited Warranty

DigitalSecurityControlswarrantsthat for a period of twelve monthsfromthe date

of purchase, the product shallbe free of defectsin materialsand workmanship

under normaluse and that in fulfillment of anybreach of such warranty, Digital

SecurityControlsshall, at itsoption, repair or replace the defective equipment

upon return of the equipment to itsrepair depot. Thiswarrantyappliesonlyto

defectsin partsand workmanship and not to damage incurred in shipping or

handling, or damage due to causesbeyond the controlof DigitalSecurityCon-

trolssuch aslightning, excessive voltage, mechanicalshock, water damage, or

damage arising out of abuse, alteration or improper application of the equip-

ment.

The foregoing warrantyshallapplyonlyto the originalbuyer, and isand shallbe in

lieu of anyand allother warranties, whether expressed or implied and of allother

obligationsor liabilitieson the part of DigitalSecurityControls. DigitalSecurity