3M Unitek Ortholux Luminous Curing Ligh 사용 설명서 지침 - 페이지 4

{카테고리_이름} 3M Unitek Ortholux Luminous Curing Ligh에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. 3M Unitek Ortholux Luminous Curing Ligh 16 페이지. Fast curing cordless led light

3M Unitek Ortholux Luminous Curing Ligh 사용 설명서 지침
Eyeshield
Handpiece

Product Description

Ortholux Luminous Curing Light, is a high-performance
light source for intraoral polymerization of orthodontic
adhesives. It consists of a charger and a cordless
handpiece powered by a rechargeable battery.
The charger is designed for use on a table and cannot
be wall-mounted.
The light source is a high-performance light-emitting
diode (LED). The emitted light covers the light
wavelengths between 430 and 480 nm.
Settable exposure times:
• 3, 6, 9, or 12 seconds.
• Extended mode (15 seconds)
• Tack cure mode (1 second)
The charger is equipped with an integrated light
intensity testing area.
The unit is shipped with an 8 mm diameter light guide.
It is not permissible to use light guides from other
manufacturers.
The handpiece is equipped with a sleep mode to minimize
the unit's energy consumption. The handpiece switches
to sleep mode once it is placed in the charger or if left
unused for approximately 5 minutes outside the charger.
NOTE: Do not discard these Instructions for the
duration of product use.
Light guide

Fields of Application

•   Polymerization of light-curing orthodontic 

Technical Data

Charger

Operating voltage:
Power input:
Dimensions:
Charger
adhesives with photoinitiators in the
wavelength range of 430-480 nm.
The high intensity light output of the Ortholux
Luminous Curing Light allows for faster curing
times than other available curing lights. Refer to
the table under Recommended Cure Techniques
with 3M Unitek Adhesives.
- Though the majority of light-curing orthodontic
adhesives are responsive in this range of
wavelengths, you may wish to contact the
manufacturer of the material in question.
100 - 127 V 50/60 Hz
230 V 50/60 Hz (see rating
plate for factory-set voltage)
Nominal consumption
0.045 A (230 V)
0.1 A (100-127 V)
Length: 170 mm
Width: 95 mm
Height: 50 mm
Weight: 650 g
Power cord
English
4