3M-Matic S867 L-Clip Applicator 지침 및 부품 목록
{카테고리_이름} 3M-Matic S867 L-Clip Applicator에 대한 지침 및 부품 목록을 온라인으로 검색하거나 PDF를 다운로드하세요. 3M-Matic S867 L-Clip Applicator 6 페이지. 10500;29500
페이지 인쇄Instructions and Parts List
3M-Matic
P/N 70-0708-6798-4
S867/S857 U-Clip
Modification Kit
For use on 3M-Matic™
S867 L-Clip Applicator, Type 10500
S857 L-Clip Applicator, Type 29500
Purpose of Kit
The U-Clip Modification Kit is designed to buff a
standard L-clip down to form a U-shaped tape clip
around the edge of thinner cartons when used on the
S867 or S857 L-Clip Applicators. U-clips can be
applied to cartons from 1/4 inch [6.4 mm] thick to 2
inches [50 mm] thick. Refer to the Specifications
section.
Contents of Kit
Quantity
Description
1
Buffing Assembly
1
Buffing Sleeve
2
Capscrew, Soc. Hd., 10-24 x 1/2 Lg
2
Washer, Plain, Type A, #10
1
Instructions and Parts List
TM
Specifications
Tape length applied, total: 4 1/2 inches [115 mm]
U-clip tape lengths:
Bottom of carton:
End of carton:
Top of carton:
Carton size capacity:
1/4 inch [6.4 mm] minimum
2 inch [50 mm] maximum
2 1/4 ± 1/8 inch
[55 mm ± 3.2 mm]
Thickness of carton
2 1/4 [55 mm], minus
thickness of carton