DSE RH Series 매뉴얼 - 페이지 10

{카테고리_이름} DSE RH Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DSE RH Series 12 페이지. Ip anpr cameras with ocr
DSE RH Series에 대해서도 마찬가지입니다: 구성 (12 페이지)

ANPR. MANUAL

RH SERIES - PLATE READING IP CAMERAS

Page:10

Advanced adjustments

If you are not satisfied with the basic settings, you can customize them. Enter the sensor

configuration, as seen previously, and activate the DEBUG mode and the SCHEMA2 which is used

in night shooting.

Below we explain the fundamental parameters that come into play in the recovery of the night

license plates

In the EXPOSURE folder you find the shutter speed which is recommended at 1/1000. You can set

it to shorter values, such as 1/2000 if you plan the passage of vehicles at high speed. The area

can be set to CENTER AREA or even CENTER SPOT if you want more brightness in the center.

The manual IR power mode is set in the DAYNIGHT folder at the factory. With the slider you can

adjust the power of the LEDs which is factory set to 40. The power is adjusted according to the

distance of the vehicle, but in general it must be kept rather low to prevent the plate from being

bleached at night. On close-ups the best result is obtained with very low values even from 2 to 5.

DSE SRL - ITALY - WWW.DSE.EU