DSE DSE8610 MKII 설치 지침 - 페이지 2

{카테고리_이름} DSE DSE8610 MKII에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. DSE DSE8610 MKII 2 페이지.
DSE DSE8610 MKII에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (2 페이지)

페이지 인쇄

NOTE: Depending upon module configuration, some parameters in the Main

and Running Editors may not be available. For more information refer to DSE

publication 057-239 DSE8610 MKII Configuraiton Suite PC Software Manual

available from www.deepseaplc.com

MAIN CONFIGURATION EDITOR PARAMETERS

Section

Parameter As Shown On Display

Values

Display

Contrast

Language

English, Other.

Current Date and Time

DD:MM:YY, hh:mm:ss

Alt Config

Default Config

Default Config / Alternative Config

Engine

Oil Pressure Low Shutdown

0.00 bar

Oil Pressure Low Pre Alarm

0.00 bar

Coolant Temperature Low Warning

0 ºC

Coolant Temp High Pre Alarm

0 ºC

Coolant Temp High Shutdown

0 ºC

Start Delay Off Load

0 h 0 m 0 s

Start Delay On Load

0 h 0 m 0 s

Start Delay Telemetry

0 h 0 m 0 s

Pre Heat Temp

0 ºC

Pre Heat Timer

0 h 0 m 0 s

Post Heat Temp

0 ºC

Post Heat Timer

0 h 0 m 0 s

Cranking

0 m 0 s

Cranking Rest

0 m 0 s

Safety On Delay

0 m 0 s

Smoke Limiting

0 m 0 s

Smoke Limiting Off

0 m 0 s

Warming

0 h 0 m 0 s

Cooling

0 h 0 m 0 s

Under Speed Shutdown

Active / Inactive

Under Speed Shutdown

0 RPM

Under Speed Warning

Active / Inactive

Under Speed Warning

0 RPM

Over Speed Warning

Active / Inactive

Over Speed Warning

0 RPM

Over Speed Shutdown

0 RPM

Overspeed Overshoot

0 m 0 s

Overspeed Overshoot

0 %

Fail To Stop Delay

0 m 0 s

Battery Under Voltage Warning

Active / Inactive

Battery Under Voltage Warning Delay 0 h 0 m 0 s

Battery Under Voltage Warning

0.0 V

Battery Over Voltage Warning

Active / Inactive

Battery Over Voltage Warning Delay

0 h 0 m 0 s

Battery Over Voltage Warning

0.0 V

Charge Alternator Failure Warning

Active / Inactive

Charge Alternator Failure Warning

0.0 V

Charge Alternator Warning Delay

0 h 0 m 0 s

Charge Alternator Failure Shutdown

Active / Inactive

Charge Alternator Failure Shutdown

0.0 V

Charge Alternator Shutdown Delay

0 h 0 m 0 s

Droop

Active / Inactive

Droop

0 %

Fuel Usage Running Rate

0 %

Fuel Usage Stopped Rate

0 %

DPF Auto Regen Inhibit

Active / Inactive

Specific Gravity

0.80 to 1.00

CAN Termination

Active / Inactive

Generator

Under Voltage Shutdown

0 V

Under Voltage Pre-Alarm

0 V

Loading Voltage

0 V

Nominal Voltage

0 V

Over Voltage Pre-Alarm

0 V

Over Voltage Shutdown

0 V

Under Frequency Shutdown

0.0 Hz

Under Frequency Pre-Alarm

0.0 Hz

Loading Frequency

0.0 Hz

Nominal frequency

0.0 Hz

Over Frequency Pre-Alarm

0.0 Hz

MAIN CONFIGURATION EDITOR PARAMETERS (CONTINUED)

Section

Parameter As Shown On Display

Values

Generator

Over Frequency Pre-Alarm

0.0 Hz

(Continued) Over Frequency Shutdown

0.0 Hz

Full Load Rating

0 A

kW Overload Trip

0 %

Delayed Over Current

Active / Inactive

Gen Over Current Trip

0 %

AC System

3 Phase, 4 Wire

CT Primary

0 A

CT Secondary

0 A

Short Circuit Trip

0 %

Earth CT Primary

0 A

Earth Fault Trip

Active / Inactive

Earth Fault Trip

0 %

Transient Delay

0.0 s

Gen Reverse Power Delay

0.0 s

Full kW Rating

0 kW

Full kVAr Rating

0 kvar

Ramp Up Rate

0 %

Ramp Down Rate

0 %

Load Level For More Sets

0 %

Load Level For Less Sets

0 %

Load Demand Priority

Gen Reverse Power Trip

0 kW

Insufficient Capacity Delay

0 m 0 s

None / Indication / Warning /

Insufficient Capacity Action

Shutdown / Electrical Trip

None / VAr Share / VAr Fixed

Reactive Load CTL Mode

Export

Load Parallel Power

0 kW

Load Power Factor

0 %

Enable MSC Compatibility

Active / Inactive

Timers

LCD Page Timer

0 h 0 m 0 s

Scroll Delay

0 h 0 m 0 s

Engine Pre Heat Timer

0 h 0 m 0 s

Engine Post Heat Timer

0 h 0 m 0 s

Engine Cranking

0 m 0 s

Engine Cranking Rest

0 m 0 s

Engine Safety On Delay

0 m 0 s

Engine Smoke Limiting

0 m 0 s

Engine Smoke Limiting Off

0 m 0 s

Engine Warming

0 h 0 m 0 s

Engine Cooling

0 h 0 m 0 s

Engine Overspeed Overshoot

0 m 0 s

Engine Fail To Stop Delay

0 m 0 s

Battery Under Voltage Warning Delay 0 h 0 m 0 s

Battery Over Voltage Warning Delay

0 h 0 m 0 s

Return Delay

0 h 0 m 0 s

Generator Transient Delay

0 s

Schedule

Active / Inactive

Schedule Bank 1 Period

Weekly / Monthly,

On Load / Off Load / Auto Start

Press

Inhibit, Week, Start Time, Run Time

or down when selecting the

and Day. Selection (1 to 8)

different parameters.

Schedule Bank 2 Period

Weekly / Monthly,

On Load / Off Load / Auto Start

Press

Inhibit, Week, Start Time, Run Time

or down when selecting the

and Day. Selection (1 to 8)

different parameters.

DIMENSIONS AND MOUNTING

Parameter

Specification

Dimensions

245 mm X 184 mm X 51 mm (9.6" X 7.2" X 2.0")

Panel Cutout

220 mm X 160 mm (8.7" X 6.3")

Weight

0.98 kg (2.16 lb)

Operating Temperature

-40 ºC to +70 ºC (-40 ºF to +158 ºF)

Storage Temperature

-40 ºC to +80 ºC (-40 ºF to +176 ºF)

ACCESSING THE 'RUNNING' CONFIGURATION EDITOR

•

The 'Running' Configuration Editor is enterable without stopping the engine. All

protections remain active whilst using the 'Running' Configuration Editor.

•

Press and hold the

RUNNING CONFIGURATION EDITOR PARAMETERS

Power Cycle After Exit

Section

Parameter As Shown On Display

Power Cycle After Exit

Display

Contrast

Language

Load Demand Priority

)

Commissioning Screens

Override Starting Alarms

Voltage Adjust

(manual mode only, breaker open)

Frequency Adjust

(manual mode only, breaker open)

Mains Decoupling Test Mode

Engine

Governor Gain

Frequency Adjust Offset

DPF Auto Regen Inhibit

DPF Manual Regen

Power

Power Control Mode

Levels

kVAr Control Mode

Load Parallel Power

In Mains Parallel Mode

Load Parallel kVAr

In Mains Parallel Mode

Load Parallel PF

REQUIREMENTS FOR UL CERTIFICATION

WARNING!: More than one live circuit exists, see diagram overleaf for further

information.

Specification

Screw Terminal

Tightening Torque

Conductors

to begin editing then up

Current Inputs

Communication

to begin editing then up

Circuits

DC Output Pilot Duty

Mounting

Operating

Temperature

(Tick) button to enter and exit the running editor.

Values

0 %

English, Other

Active / Inactive

0 %

Active / Inactive

0.0

0.0 Hz

Active / Inactive

Const Power / Frequency-Power /

Voltage-Power

Const Power Factor / Voltage-

Reactive Power / Power-Power

Factor / Const Reactive Power

0 %

0.00 pf

Description

• 4.5 lb-in (0.5 Nm)

• Terminals suitable for connection of conductor size 13 AWG

to 20 AWG (0.5 mm² to 2.5 mm²).

• Conductor protection must be provided in accordance with

NFPA 70, Article 240

• Low voltage circuits (35 V or less) must be supplied from the

engine starting battery or an isolated secondary circuit.

• The communication, sensor, and/or battery derived circuit

conductors shall be separated and secured to maintain at

least ¼" (6 mm) separation from the generator and mains

connected circuit conductors unless all conductors are rated

600 V or greater.

• Must be connected through UL Listed or Recognized isolating

current transformers with the secondary rating of 5 A max.

• Must be connected to communication circuits of UL Listed

equipment

• 0.5 A

• Suitable for flat surface mounting in Type 1 Enclosure Type

rating with surrounding air temperature -22 ºF to +122 ºF (-30

ºC to +50 ºC)

• Suitable for pollution degree 3 environments when voltage

sensing inputs do not exceed 300 V. When used to monitor

voltages over 300 V device to be installed in an unventilated

or filtered ventilation enclosure to maintain a pollution degree

2 environment.

• -22 ºF to +122 ºF (-30 ºC to +50 ºC)