DSPeaker Anti-Mode 8033S-II 사용자 설명서 - 페이지 11

{카테고리_이름} DSPeaker Anti-Mode 8033S-II에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DSPeaker Anti-Mode 8033S-II 20 페이지. Automatic subwoofer equalizer

-M

8033

/ 8033S-II

NTI

ODE

CINEMA

3.1. Strategy 1, "Compensation of the worst response point"

When the first (main) calibration is performed at the primary listening position or at the center of

the listening area, you can then evaluate the result by listening at different positions around the

room.

If the result is not adequate at some location, that location can be used as a secondary calibration

point. Also any location between the secondary point and the first point can lead to good results.

Inevitably, the result will get less optimal at the first point, but is usually improved everywhere else,

including the worst response point.

If it is difficult to find the worst response point in the listening area, Gradient compensation is a

good approach. Find the secondary calibration point by moving the microphone from the first

calibration point toward the closest corner of the listening room by 40-90 cm (16 to 36 inches) and

downwards (towards the floor) approximately 10-20 cm (4 to 8 inches).

Perform the secondary calibration with the microphone in this position. If the first calibration point

was closer than a meter (39 inches) from the wall, the microphone should be moved only about

20-40 cm (8 to 16 inches) towards that wall for the secondary calibration.

The Gradient compensation method works well in removing the resonances arising from

reflections between opposing walls or floor/ceiling (axial modes) for larger areas in a rectangular

room.

Rev. 2.0

18.06.2012

Page 11 (20)