DSPeaker Anti-Mode X2 사용자 설명서 - 페이지 7
{카테고리_이름} DSPeaker Anti-Mode X2에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DSPeaker Anti-Mode X2 12 페이지.
페이지 인쇄
Tone Control
d
opens the real-time tone adjustment. You can adjust bass, midrange, and
treble according to your personal preference. Use
f
to adjust. Use
and
i
Keep
pressed to fine tune the parameters of each filter. Bass and Treble
filters support adjustable range. Use
d
wider. Press
or
adjustment.
The mid-range filter supports user-selectable range and also a variable center
frequency. After choosing the range, at the "Fc" prompt, use
select a new center frequency. Target frequency is shown in kilohertz (kHz) unit
on the display, e.g. "1.5" means a center frequency of 1500 Hz. Press
a
to accept or
to cancel the adjustment.
By-Pass Mode
d
Pressing
and then
room correction is not active. Some enhancements made by the system remain
active. These include the crossover between subwoofer and main channels in
the 2.1 configuration and speaker level matching. Press any button to leave the
d
bypass mode, then
Subwoofer Output Level
d
Pressing
and then
setting is only relevant if you have calibrated with the 2.1 configuration.
c
Pressing
again returns to the tone control view, then
the home screen.
Sound Profiles
Anti-Mode X2 supports 3 sound profiles that can be used to store different
settings for different situations. You can switch between the profiles in real
time by pressing the
i
prompted and
to confirm.
Each sound profile can store different room calibration data, tone control preference and subsonic filter.
Rev. 1.1
e
to adjust filter gain in the chosen region.
g
and
i
to accept the new value, or
b
enters a bypass mode. In this mode the Anti-Mode
i
or
to return to the home screen
c
allows to change the relative subwoofer level. This
c
button. Use the
g
h
and
h
to make the range narrower or
a
d
f
e
and
to select a profile when
2022-08-10
to select a region
to cancel the
g
h
and
to
d
i
or
TM
i
or
returns to
A
-M
TM
X2
NTI
ODE
U
'
G
SER
S
UIDE
Page 7 (12)