DSPeaker Anti-Mode X2 User Manual - Page 7

Browse online or download pdf User Manual for Network Hardware DSPeaker Anti-Mode X2. DSPeaker Anti-Mode X2 12 pages.

Print Page

Tone Control

opens the real-time tone adjustment. You can adjust bass, midrange, and

treble according to your personal preference. Use

to adjust. Use

and

Keep

pressed to fine tune the parameters of each filter. Bass and Treble

filters support adjustable range. Use

wider. Press

adjustment.

The mid-range filter supports user-selectable range and also a variable center

frequency. After choosing the range, at the "Fc" prompt, use

select a new center frequency. Target frequency is shown in kilohertz (kHz) unit

on the display, e.g. "1.5" means a center frequency of 1500 Hz. Press

to accept or

to cancel the adjustment.

By-Pass Mode

Pressing

and then

room correction is not active. Some enhancements made by the system remain

active. These include the crossover between subwoofer and main channels in

the 2.1 configuration and speaker level matching. Press any button to leave the

bypass mode, then

Subwoofer Output Level

Pressing

and then

setting is only relevant if you have calibrated with the 2.1 configuration.

Pressing

again returns to the tone control view, then

the home screen.

Sound Profiles

Anti-Mode X2 supports 3 sound profiles that can be used to store different

settings for different situations. You can switch between the profiles in real

time by pressing the

prompted and

to confirm.

Each sound profile can store different room calibration data, tone control preference and subsonic filter.

Rev. 1.1

to adjust filter gain in the chosen region.

and

to accept the new value, or

enters a bypass mode. In this mode the Anti-Mode

to return to the home screen

allows to change the relative subwoofer level. This

button. Use the

and

to make the range narrower or

and

to select a profile when

2022-08-10

to select a region

to cancel the

and

returns to

-M

NTI

ODE

SER

UIDE

Page 7 (12)