3nStar BC1005 기술 및 서비스 매뉴얼 - 페이지 5

{카테고리_이름} 3nStar BC1005에 대한 기술 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3nStar BC1005 12 페이지. Bill counter
3nStar BC1005에 대해서도 마찬가지입니다: 기술 및 서비스 매뉴얼 (8 페이지)

페이지 인쇄

E22

1. Make sure banknotes are in order when feeding. Do not tilt the banknotes.

2. Check feeding rollers, and make sure 3 rollers on the left & 3 rollers on the right have the

same pulling power.

E15

1. Check the alarmed note if the dimension is different.

E33

1. Check the alarmed note if it might have holes.

2. Check the alarmed note if the width might differ from the normal.

E10

1. Check and make sure that no other thing gets inside the machine and the conditions are

normal.

2. Turn on the machine and listen the big motor sound if it is not working.

a. Big motor plug not connected well to mainboard

b. Main board damaged

c. Capacitor is damaged

3. If the big motor is working, check if the feeding roller is running or not. If not working:

a. Belt drop out

4. If the feeding roller can run, check the small DC motor:

a. Small motor plug is not connected well to mainboard

b. Mainboard damaged

c. Small motor is damaged

5. Check the speed sensor

a. Speed sensor damaged

b. Speed disk deformed