Attero Tech Dante unDX2IO+ 사용자 설명서 - 페이지 12
{카테고리_이름} Attero Tech Dante unDX2IO+에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Attero Tech Dante unDX2IO+ 16 페이지. 4 x 2 wallplate
페이지 인쇄2.4 – Factory Reset
The unDX2IO+ has a factory reset option. Using it will reset all the devices parameters back to their factory defaults
including all the Dante settings such as device name, channel names as well as the device settings such as input select.
The devices IP address mode is also reset back to getting a dynamic IP.
Access to the factory reset button is through a small circular hole on the
underside of the unit, next to the ventilation cutouts.
To use the factory reset, insert a small screwdriver or paperclip into the
hole to activate the factory reset switch. There should be a noticeable
"click" when it's activated. Hold the switch in for 5 to 10 seconds then
release. If the factory reset was successful, the unit will actually reset
indicated by the power LED will turning red.
Attero Tech, LLC
1315 Directors Row, Suite 107, Ft Wayne, IN 46808
Phone 260-496-9668 • Fax 260-496-9879
www.atterotech.com
614-00036
unDX2IO+
User Manual