Attero Tech AXON D2FLEXio 사용자 설명서 - 페이지 7
{카테고리_이름} Attero Tech AXON D2FLEXio에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Attero Tech AXON D2FLEXio 11 페이지. Dual analog flex i/o networked audio interface
페이지 인쇄2.2– Error Reporting
The D2FLEXio is equipped with error reporting features. Upon
power up, the front panel power LED will briefly light red and then
change to green if the device boots successfully. The following
chart indicates other error states:
LED State
Red
Flashing Red
Corrupt Image (Contact Tech Support)
Green
Flashing Green
Flashing Blue
White
2.3 – Hardware Connections
The D2FLEXio provides balanced line-level audio connections to
external analog audio equipment. Refer to the following
diagrams and instructions for connecting different types of
audio devices to the input and/or outputs of the D2FLEXio.
Professional grade audio cabling is recommended to achieve the
best audio performance throughout the system.
Figure 5 - I/O ports/wiring
Status
No Sync present or Error
Slave Synchronized
Clock Master
Identify
Factory Mode
1315 Directors Row Suite 107 Fort Wayne, IN 46808 ⁞ (260)496-9668 ⁞ www.atterotech.com
2.3.1 – Balanced to Balanced Wiring
Balanced
Terminal Block Plug
GND
-
+
3-Wire Cable
Balanced
Terminal Block Plug
GND
-
+
3-Wire Cable
Figure 6 - Balanced Wiring Guide
2.3.2 Balanced to Unbalanced Wiring
Figure 7 – Unbalanced Wiring Guide
2.3.3– Unbalanced to Balanced Wiring
TS Plug
Tip
Sleeve
RCA Plug
Tip
Sleeve
Figure 8 – Unbalanced Wiring Guide
XLR-M
2
Pin 1
1
Pin 3
Pin 2
3
TRS Plug
Sleeve
1
2
Ring
Tip
3
Balanced
Terminal Block Plug
GND
2-Wire Cable
Balanced
Terminal Block Plug
GND
2-Wire Cable
Page 4