Attero Tech unA4O AES67 사용자 설명서 - 페이지 11

{카테고리_이름} Attero Tech unA4O AES67에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Attero Tech unA4O AES67 11 페이지. Four output interface

페이지 인쇄

4 – ARCHITECTS & ENGINEERS SPECIFICATION

The AES67 break out Interface shall have four balanced line analog outputs. Each analog output shall be capable of being driven from an

AES67 audio stream.

Each output channel shall have adjustable gain between 0dB and –60dB in 1dB increments plus a mute, selectable via software on a per

channel basis.

All parameter changes will be non-volatile and self-restoring in the event of AC or PoE power interruption.

The unit shall accept either +24VDC or IEEE 802.3af standard PoE as power input. The unit shall be compliant with FCC 47CFR Parts 15B

and 18 (Class A), EN 55011, ICES-003, CE (EN55022 Class A and EN55024 Class A), and RoHS requirements.

The unit shall be the Attero Tech unA4O Output Interface

4.1 – Device Specifications

Analog Audio Outputs (Terminal Block)

Balanced line level with automatic muting on loss of

Output Type

AES67 signal

Output Volume

-60 dB to 0dB in 1 dB steps

Maximum Output Level

+20dBu (@ 0dBFS)

Audio Performance

Output Noise

<-80dBu @ 0dB gain

System THD

<0.01% at an output level 3dB below maximum

1315 Directors Row Suite 107 Fort Wayne, IN 46808 ⁞ (260) 496-9668 ⁞ www.atterotech.com

Audio Network

Physical Level

Standard Ethernet

Connector

Single RJ-45

Cable Quality

CAT-5e or better

Transmission Speed

100 Mbps

44.1kHz

Supported Sample Rates

48kHz

Minimun Latency

1ms

Power Requirements

PoE

802.3af PoE PD compliant

Power Consumption

< 5W Max

Cable Quality

CAT-5e or better

Physical Dimensions

Width

6.45"

Height

1.06"

Depth

3.45"

Weight

0.8 lbs.

Regulatory Compliance

FCC CFR 47 Parts 15B Class A, EN55011

ICES-003

Certifications

CE (EN55022 / EN55024)

RoHS

REACH

Page 11