DT DT SCREENS Dynamic 2S 설치 매뉴얼 - 페이지 2
{카테고리_이름} DT DT SCREENS Dynamic 2S에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DT DT SCREENS Dynamic 2S 12 페이지.
페이지 인쇄
PLEASE READ PRIOR TO INSTALLATION
Before installation of this projection screen you should fully read these instructions to ensure you
are aware of the full installation procedure. In addition to the screen and accessories and in order to
carry out the installation you will need:
•
Spirit Level
•
Philips Screw Driver
Suitable screw fixings of at least 40mm long if the wall which is being fixed into is not a
•
wooden structure.
Parts:
Left Frame
•
•
Right Frame
Top Left Frame
•
Top Right Frame
•
•
Bottom Left Frame
Bottom Right Frame (Contains control box)
•
Left Frame Cover
•
•
Right Frame Cover
Top Left Frame Cover
•
Top Right Frame Cover
•
•
Bottom Left Frame Cover
Bottom Right Frame Cover
•
4 x Inner screen covers
•
•
2 x Stretcher Bar
Black Backing Surface
•
•
White Screen Surface
•
Installation Accessories Pack
In the Installation accessories you will find:
•
White Cotton Gloves to be used at all times when handling the white screen fabric
Fabric Installation tool
•
•
40mm fixing screws
•
Silent Tension System Bands
IEC power Cable
•
It is recommended that at least 2 people install the screen as larger screens can be heavy and
awkward to lift. Good lifting practices and lifting aids should be used as required to aid installation.
Dynamic 2S Installation Manual – V0.2
2