ATW AirDew AD-5 사용자 설명서 - 페이지 7

{카테고리_이름} ATW AirDew AD-5에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ATW AirDew AD-5 16 페이지. Atmospheric water system

Installation & Operation

Location of installation (Indoor use only)

1. Avoid direct sunlight, exposure to rain and extreme heat or cold.

(water parts may freeze or rupture)

2. Place the unit on hard, flat surface to prevent noise, leakage or

shaking.

3. Place unit in an well-ventilated place.

4. For proper air flow and operation, place unit at least 30 cm away

from wall.

5. To keep unit sanitary, avoid harmful gas or excessive heat.

1. Check country power supply: 230V or 115V.

2. Ensure unit is plugged into the right socket.

3. Use grounded socket ONLY.

4. Use socket with circuit breaker.

5. DO NOT share plug with other appliances.

6. DO NOT touch power socket with wet hands.

7. DO NOT place heavy object on power cord.

1. If unit has been tilted or laid down on side, do not start-up for at

least 30 minutes.

2. Connect plug to socket.

3. Push Power Button for 3 seconds to start-up.

4. Do a priming process. (See image 1-1, 1-2)

5. Use Menu/Set button for desired water temperature. (see page 13)

6. Wait until unit has generated enough water to drink.

Note: Priming process

for Quick Start and

sanitary reason, open

cap on top of unit and

pour approx. 5 liters of

drinkable water.

(Image 1-1 , 1-2)