ATW AirDew AD-5 사용자 설명서 - 페이지 9

{카테고리_이름} ATW AirDew AD-5에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ATW AirDew AD-5 16 페이지. Atmospheric water system

Cleaning (Bottom tank)

1. Use Phillips screwdriver to loosen 2

screws and remove rear panel.

(Image 3-1)

2. Touch water level sensor with finger.

(5 seconds) (Image 3-2)

3. Wait 2 minutes before unplugging

power cord.

4. Disconnect fitting and wire from

booster pump and water level

sensor respectively. (Image 3-3)

5. Slide out bottom tank.

(Image 3-4)

6. Clean with clean soft dishcloth.

7. DO NOT use detergent or chemical

cleanser.

Use clean dishcloth or soft cloth and mild detergent and water solution

if necessary.

1. Power off and unplug the unit.

2. Remove rear cover/ Loosen 2 screws with

Phillips screwdriver. (Image 3-1)

3. Carefully remove filter from filter clip.

(There may be water in hose, fitting and

filter) (Image 4-1)

4. Pull and remove filter while pushing the

adaptor of the fitting in opposite direction.

(Image 4-2)

5. Install new filter. (Place new filter in the

same way)

6. After filter exchange, reset the filter

replacement function by using Menu/Set

button. (see page 13)