AddEnergie SmartTWO 설치 매뉴얼 - 페이지 7

{카테고리_이름} AddEnergie SmartTWO에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AddEnergie SmartTWO 20 페이지.
AddEnergie SmartTWO에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (4 페이지)

Pedestal

Site preparation

ANCHOR

The installer can use a prefabricated anchor

offered by AddÉnergie (part number: S2-V2-

ACCSP-01-03) or make his own using 12"

long ½" threaded rods spaced according to the

pattern shown on left.

85.7 mm

(3.375'')

85.7 mm

(3.375'')

Fig. 1:Ancrage préfabriquée /

Fig. 2: Patron d'espacement

Fig: 1: Prefabricated anchor

Fig: 2: Threaded rod spacing

Prefabricated anchor

Threaded rod spacing

9 cm

(3.5'')

2.5 cm

CONCRETE BASE

(1'')

The base can be prefabricated or made on site

using concrete formwork.

Determine the base's height (H), depth in the

ground (D) and the surface area (A) of its sole

according to the soil type and the freeze thaw

specifications of the installation area.

H / H

P / D

Use an electrical conduit of the appropriate size

with a diameter of 2'' or less to bring the electrical

cables to the center of the anchor.

The dimension of the top of the base, and the

position of the anchor shall be determined

according to the specific charging station

S / A

configuration, as detailed on the next page.

Fig. 3: Base de béton /

Fig. 3: Concrete base

Concrete base