ABSTRACT ClubScan 사용 설명서 - 페이지 8

{카테고리_이름} ABSTRACT ClubScan에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ABSTRACT ClubScan 19 페이지.

Abstract Universal Instruction Manual

Operating the unit

When you turn the unit on, it will go through an initialisation routine where it
moves all the motors to their zero positions. You may hear some bumping
noises as the unit checks the limits of movement on the motors.
The initialisation routine takes about 20 seconds, after which the unit will begin
to respond to DMX input, or to sound if no DMX is connected.
Note: Units with halogen lamps do not turn the lamps on until
initialisation is complete.

Operation in stand alone mode

If the unit is in stand alone mode (no DMX connected), it will automatically
produce a light show in response to the music, and will control any other units
connected to it.
If you have several units, you can tell which one is generating the light show by
looking at the green LEDs. The first unit in line will automatically generate the
light show and will flash its LED in time with the music. The other units will have
their LED's on continuously.
You can set several special options on the dip switches which affect how the
unit behaves in stand alone mode; see page 6.
Note: If you connect other manufacturers' products to the DMX
output while the unit is in stand alone mode, they will probably
not respond.
Remote control for Futurescan 1, Gladiator Revolution and DuoColour:
You can black out the unit (and any others connected to it by DMX) by pressing
the Blackout button. You can make the unit strobe by pressing the Strobe
button. You can make the unit move more slowly by pressing the Slow button.
If the unit is receiving DMX, the remote control will have no effect.
On the DuoColour you can lock the colour by holding down the slow button
for a few seconds (the Slow light flashes). You can then step through the colours
by pressing the Slow button briefly.
Page 8