Comtrol RocketLinx ES8108 빠른 설치 매뉴얼 - 페이지 4
{카테고리_이름} Comtrol RocketLinx ES8108에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Comtrol RocketLinx ES8108 8 페이지. Industrial
Comtrol RocketLinx ES8108에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지), 빠른 설치 매뉴얼 (6 페이지), 빠른 설치 매뉴얼 (8 페이지)
페이지 인쇄
WIRING THE ALARM RELAY OUTPUT
The ES8108 has a built-in alarm-relay for port link and power events
notifications. The relay contacts are normally open and remain open when
there is no failure event. The relay contacts close when there is a failure
event to notify.
The failure events are selectable and enabled using the DIP switch on the
ES8108. The relay contacts of the ES8108 are rated for a maximum of 0.5A at
24VDC.
1.
Insert positive and negative wires into V+ and V-.
2.
Tighten the wire-clamp screws to prevent the wires from coming loose.
WARNING - Exposure to some chemicals may degrade the sealing properties
of materials used in the sealed relay
SETTING THE DIP SWITCH
Switch
Status
1 to 8
ON
(Port)
OFF
9
ON
(Power)
OFF
Maximum 0.5A/24VDC
Alm
PW1
PW2
Alarm Control
port 1~8
Description
Enables port link down alarm for the corresponding port
Disables port link down alarm for the corresponding port
Enables the power failure alarm
Disables the power failure alarm
Alarm
System
Extra Power
System
power
3