Abstract Data ADE-51 사용자 설명서 - 페이지 5
{카테고리_이름} Abstract Data ADE-51에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Abstract Data ADE-51 12 페이지. Vc ahdsr/ahd envelope generator
페이지 인쇄
3) Rear Connections
POWER CABLE
RED STRIPE
POWER CONNECTION:
POT CURVE TYPE:
PRECAUTIONS:
© 2017 Abstract Data Ltd.
-RED
10-16 pin Eurorack power connection
Jumper connection selects 1) Smooth or 2) Sharp Pot curves
Only connect the power cable to the power connection as shown.
DO NOT CONNECT THE POWER CABLE TO ANY OTHER PORT!
The ADE-51 uses the Doepfer standard for power connection and cable orientation.
The RED stripe on the supplied power cable connects to the NEGATIVE (-12V) rail
on the ADE-51 with the RED stripe facing DOWN. This is marked on the back of
the ADE-51 PCB as "– RED".
The ADE-51 has diode and polyfuse protection built in but an incorrectly connected
cable may still cause permanent damage to the module or the power supply.
The rear panel of the ADE-51 has exposed parts and connections. Please ensure
when handling the ADE-51 that the unit is held by the sides of the front panel or
the sides of the PCB (Printed Circuit Board).
SMOOTH
SHARP
Page 3 of 9
Version 1.0.2