Abstract Data ADE-60 사용자 설명서 - 페이지 14
{카테고리_이름} Abstract Data ADE-60에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Abstract Data ADE-60 17 페이지. 4:4 mix utility
Abstract Data ADE-60에 대해서도 마찬가지입니다: 사용자 설명서 (11 페이지)
페이지 인쇄
9.2) Patch Example 2
1) ATTENUATOR, ATTENUVERTER & SUB-MIXER
(A1) Off
(G1) Off
(B1) Off
(A2) On
(G2) Off
(B2) Off
(A3) Off
(G3) On
(B3) Off
(A4) Off
(G4) On
(B4) Off
Rear panel jumper positions
for patch example 2
2) PATCH EXPLANATION
This patch example shows the module split into 3 sections that include a 1-channel attenuator,
a 1-channel attenuverter and a 2-channel sub-mixer with input gain on both channels.
The rear panel user settings are shown on the left and include Attenuversion for channel 2 (A2)
and Gain for channels 3 and 4 (G3) and (G4).
Input signals 1-4 enter the module via the input sockets for those channels and in this configuration,
any combination of input channels can be used or left unplugged with no change in basic functionality.
Channel 3 (section 3) does not have its output connected so this signal cascades to the output
of channel 4.
The sub-mix output for section 3 is taken from channel 4 and consists of the summed inputs 3 and 4.
The volume knob for channel 1 controls volume for section 1, channel 2 controls attenuversion
for section 2 and the volume knobs for channels 3 and 4 controls the volume of the input signals
at those 2 channels for section 3.
This patch could be developed further by adding Attenuversion to section 1 or Gain to sections
1 and 2 and taking a single output from channel 4 would give you a 4-input / 1-output sub-mixer.
© Abstract Data Ltd.
[Section 1]
Attenuator
[Section 2]
Attenuverter
[Section 3]
Sub-Mixer
w/- Gain
Front panel connections
for patch example 2
Page 12 of 15
Signal 1: IN
Signal 1: VOL
Signal 1: OUT
Signal 2: IN
Signal 2: VOL
Signal 2: OUT
Signal 3: IN
Signal 3: VOL (2x)
Signal 4: IN
Signal 4: VOL (2x)
Mix 3-4: OUT
Version 1.1.0