Abstract Data ADE-60 사용자 설명서 - 페이지 16
{카테고리_이름} Abstract Data ADE-60에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Abstract Data ADE-60 17 페이지. 4:4 mix utility
Abstract Data ADE-60에 대해서도 마찬가지입니다: 사용자 설명서 (11 페이지)
페이지 인쇄
9.3) Patch Example 4
1) MULTI-FUNCTION MIX & VOLTAGE UTILITY
(A1) Off
(G1) Off
(B1) On
(A2) Off
(G2) Off
(B2) Off
(A3) On
(G3) Off
(B3) On
(A4) On
(G4) Off
(B4) Off
Rear panel jumper positions
2) PATCH EXPLANATION
This patch example is intended to show some ideas for using the module as a multi-function mix
and voltage utility.
As with the previous patch examples, the rear panel user settings are shown on the left and are
turned on by moving the black plastic jumper from the left position to the right position as required.
The input signals for sections 1 and 3 are shown on the right.
Section 2 (Channel 3) does not have an input signal as it is being used in this patch example
as a manual, output-only, voltage source.
Connecting an input signal to this channel bypasses the CV user setting and returns that channel
to its function as a single channel attenuverter.
The volume knobs for the first section controls bias/offset (Channel 1) and attenuation (Channel 2),
the knob for section 2 (Channel 3) controls the amount of DC voltage at that channel's output and
the knob for section 3 (Channel 4) controls the attenuversion of the input at that channel.
This patch could be developed further by removing the output from channel 3 and using that channel
as a bias/offset source for channel 4 and the user configuration settings could be changed to adjust
the order of the 3 sections.
© Abstract Data Ltd.
for example 4
[Section 1]
0-5V Bias
& Attenuator
[Section 2]
+/-5V Voltage
[Section 3]
Attenuverter
Front panel connections
for example 4
Page 14 of 15
Signal 1: BIAS (+)
Signal 1: IN
Signal 1: VOL
Signal 1: OUT
Voltage: VOL
Voltage: OUT (+/-)
Signal 2: IN
Signal 2: VOL
Signal 2: OUT
Version 1.1.0